Datasheet.pdf
Print Modes
Fast Draft: 530 cps
Draft: 400 cps
Fast Draft/High Impact:
250 cps
High Impact:
200 cps
Letter Quality:
100 cps
Optical Quality: 65 cps
Graphics: 5,000 dps
Character Matrix
Fast Draft: 9 x 9 cell
Draft: 12 x 9 cell
Letter Quality:
24 x 18 cell
Optical Quality: 36 x 18 cell
Printhead
18 wire parallel array.
Printhead Adjustment
Automatic gap adjustment is standard.
Character Sets
Fast Draft, Draft and Letter Quality for Epson™ and IBM® Proprinter. Optical
Quality for OCR-A and OCR-B.
Character Spacing
5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15, 16.7, 17.1 and 20 cpi.
Line Length
85 characters at 10 cpi. Also software programmable.
Line Spacing
6 and 8 lpi.
Paper Handling
Zero Tear-Off distance; paper out/paper jam detection; fanfold, continuous
forms, edge punched.
Continuous Mode
Automatically loads paper from another tractor if paper out condition
occurs. Only available in model 852si.
Operator Controls
Normal Operating Mode: Online, Form
Feed/Load and Form Select/Unload.
Form Parameters
Non-volatile memory for ten forms, each supporting settings for: tractor
path, cpi, lpi, form length, left and right margins, top and bottom margins,
unidirectional printing, slashed or non-slashed zero, language, font,
high-impact on/off, form name.
Ribbon
Cartridge:
nylon fabric, mobious loop, approximately 15 million characters.
Operating Indicators
LED indicates Online/Fault/Setup; 2 x 16 LCD for form selection; on/off line
status and error descriptions.
Power Requirements
Voltage:
100 to 250 VAC ±10%
Frequency:
50 to 60 Hz
Power Consumption: 18W non-printing, 60W
printing.
Paper Slew Rate
Model 850/850si: 6 ips rear feed
Model 852si: up to 12 ips bottom feed
Paper Width
2.5 to 9.75 inches (6.4 to 24.8 cm).
Paper
Loading
Model 850/850si:
Rear feed.
Model 852si:
Rear feed and straight through bottom feed.
Multi-Part Forms
Model 850:
1 to 5 parts; 0.025" max. thickness
Model 850si/852si:
1 to 9 parts; 0.025" max. thickness
Graphics Density
60 to 240 dpi horizontally x 72 dpi vertically.
Audible Noise (Draft Mode)
60 dBA.
Setup (Automatic Methods)
Control panel, pluggable cloning module or remote via Windows program.
I/O Buffer
32k.
Standard Interfaces
Parallel: Centronics compatible.
Serial:
RS232, 300 to 9,600 baud.
Optional Interfaces
Ethernet.
Software Controls
Emulation choice of Printek, Epson FX¨, IBM Proprinter, DEC LA120/210,
Genicom ANSI (includes 20 popular bar codes) or Basic Bar Codes (includes
Code 39, 2 of 5, Interleaved 2 of 5).
Physical Specifications
H x W x D: 7"x 18.5"x 17"
(17.8 cm x 47 cm x 43.2 cm)
Second tractor on model 852si adds 3.5" (8.9cm) to height.
Weight: 32 lbs. (16.9 kg)
Second tractor on model 852si
adds 10 lbs. (5.3 kg) to the weight.
Reliability
Model 850: MTBF -
10,000 hours on electronics, with 50% duty cycle.
Model 850si/852si:
MTBF - 10,000 hours on electronics, with
100% duty cycle.
Printhead Life:
500 million characters.
Warranty:
One-year printer warranty, two-year limited printhead warranty when Printek
brand ribbons are used; one-year warranty when non-Printek brand ribbons are
used.
* Note:
If you plan to do continuous feed print jobs with any of the PrintMaster 850
Series printers, we recommend that you purchase the optional Paper Guide .
Known Crosses:
Status:
